Ink cartridges supply ink or toner to printers. A printer cannot create prints without an ink cartridge or using a faulty one. These printer components are extremely delicate. They must for that reason be handled having a lot of care. Some of the precautions that really should be taken once you purchase an ink cartridge include:
Store the box containing the cartridge in a cool dry spot away from direct contact with excess heat or cold. Heat will cause the cartridge to leak
Unless you need to install the cartridge, in no way get rid of it from the packaging which houses it
Constantly make sure the cartridge is stored using the print head facing upwards for the reason that if it faces down ink could leak out
When you obtain the cartridge make sure you check the expiry date on the packaging box. Since an expired cartridge might not function.
Location cartridges away from the reach of youngsters
How To Handle The Cartridge During Installation
Whenever the cartridge in your printer is almost empty the printer will display a message on the screen warning you that the cartridge is almost empty. When you see this warning you should be prepared to change to a full cartridge. It is important to note that the quality of your print outs will decline the moment the warning is displayed and continue to do so until the prints are no longer legible.
The following is usually a step by step process of installing a brand new ink cartridge:
Get the full cartridge from the store and go through the instructions on the packaging box for those who have in no way installed 1 before. For those that have completed it just before there’s also no harm of reading the instructions. It only takes a couple of minutes!
Shut down the printer along with the compartment exactly where the cartridge is installed and eject the empty cartridge carefully
Open the packaging box and cautiously remove the cartridge which are going to be inside an air tight nylon material. Cut a modest piece of the nylon as indicated and unwrap the rest of the material cautiously producing confident you hold the cartridges from the upper side.
Get rid of the tape that covers the location where the print head is located making positive you don’t touch the print head itself.
Based on the instructions outlined on the packaging box install the cartridge carefully until you hear a clicking sound that signifies the cartridge is in position.
Close the compartment and restart your printer. Give the printer time to initialize after which check if the earlier warning still exists. If you have followed the right procedure the warning will not be there and your printer will be prepared to print.
What You must Never Do
In no way touch the the copper conductors or the plate on the print head.
Never shake the cartridge since it may leak
Never ever open the nylon casing which houses the ink cartridge and leave it open for a long time. (Longer than 20 minutes)
Never force the cartridge into the printer since you might damage it or other parts with the printer
Never dispose the used cartridge in fire. If you do not intend to refill it throw it in a dustbin.