Tag Archives: industrial lighting

Fluorescent Light Fixture And Fluorescent Light Tube

A fluorescent light tube or fluorescent light fixtureis a lamp which excites mercury vapor by utilizing electricity. In a fluorescent light tube, the light is caused by the exciting of mercury. It should, therefore, be noted that the fluorescence or light is caused by mercury found inside the bulb. Also, pertinent to note is that fluorescent light tubes save a lot of energy and are, therefore, recommended by several people. Additionally it is necessary to note that fluorescent bulbs are completely different from incandescent lamps, as far as power consumption is concerned. This is because; the forme consume less energy as compared to the latter.

When one is faced with making a choice between the 2 bulbs, it’s essential to remember the benefits and drawbacks of both. Additionally, pertinent to note is that the government of Malaysia has often encouraged the use of fluorescent bulbs as opposed to other bulbs. The biggest advantage offered by the fluorescent bulbs is that they save a lot of energy. This is mainly because; the bulbs typically use gas and mercury as opposed to electricity. The bulbs have, therefore, often been regarded as energy efficient and are recommended by authorities in Malaysia.

Additionally, important is that fluorescent light tubes don’t have filaments, like the other bulbs. These bulbs use cathodes, which send current through the mercury vapors that are in the tube. The light is produced by the lighting of the cathode and the effect of the mercury. When the cathode is lit, the mercury is pushed out of its natural orbit, thus, causing fluorescence in the process. It’s, therefore, noted that the process of giving off light in fluorescent bulbs is a bit completely different from that in the common or conventional bulbs.

Fluorescent light fixtures have different shapes and sizes. These lamps range from one hundred millimeters to 2.forty three meters for miniature lamps and high output lamps respectively. The lamps also range from straight to circular or U shaped lamps, depending on the purpose for which it’s intended. In most cases, the U shaped lamps are used for lighting in small areas or for indoor purposes. On the other hand, the straight fluorescent light tubes are normally used for the lighting of large surface areas. A few of the tubes are also shaped or made for specific purposes, for example, lighting of dining tables among others. Therefore, the purpose of the tube will be determined by how much light output it produces.

Like other bulbs, fluorescent light fixtures also have fuses. The fuse to be used will depend upon the fluorescent bulb in question. For instance, long bulbs use totally different bulbs from the round or U tube bulbs.

All in all, it is noted that fluorescent light fixtures have been established to be cheaper than other bulbs or tubes. They’re additionally energy efficient and are, therefore, fit for the environment. These bulbs are, therefore, ideal for all lighting needs in Malaysia.

KohSun (KL) Sdn Bhd is one of the leading companies involved in the manufacture of fluorescent luminaires, components and accessories in Malaysia under the brand name of K. S. LITE. We manufacture a wide range of fluorescent fittings from economical batten fittings to high efficiency VISUAL DISPLAY UNITS ( VDU ) pre-anodized aluminium parabolic louvers fittings including custom made fixtures of special design for special application.

Some Of The Best Fluorescent Lighting Fixtures Malaysia

One of the most popular and efficient lighting system is fluorescent lighting which is used all over the world. In commercial facilities, the fluorescent lighting is found commonly. Generally fluorescent lighting is only available in colder colour of light. However there are some fluorescent lighting systems present which produce warmer colour of light. However as the technology improved, warmer lamp color, fluorescent lighting system has produced. These are cost efficient also. The interest of people of residential locations has renewed to use fluorescent lighting. A few of the best warmer lamp color fluorescent lightings are found in lighting fixtures Malaysia. However the main barrier of the wider use of the fluorescent lighting is its initial cost as the fluorescent lighting system is more expensive to be put in then the incandescent lighting.

However very best quality fluorescent lighting in a low price is available in Malaysia and that’s the reason of popularity of lighting fixtures Malaysia.

The lighting fixtures offered by Malaysia are considerably cheaper when operated and the fluorescent lamps last for longer than the incandescent lamps. So the profit can be yours in a long run. The fluorescent lightings are manufactured in numerous varieties, size, shapes, light intensity and colors. These fluorescent lightings can be utilized for operation in cold locations. Another fluorescent lights produce large amount of light. The fluorescent lamps are also manufactured for decorative purposes. These lamps are made to produce different colors of light like red, green, blue etc. Probably the most generally used fluorescent lamps are blue and inexperienced lamps. These green and blue colour fluorescent lamps are produced utilizing bright phosphors which actually help to produce green and blue light.

The tube used with the non-tinted glass and the bright phosphors. The phosphor which produces bright light is used while making a lamp which can produce red colour lighting and for other colour lighting the specific colour glass is tinted. Apart from the primary colors, many alternative varieties and shades of white are manufactured by lighting fixtures Malaysia for general lighting use. Normally they manufactured fluorescent lighting lamps in three completely different shades of white. They are warm white, Daylight and cool white. Although some other shade are also manufactured which are normal as designer, Deluxe or designation. The warm white lamps are generally marketed to the residential and other areas as these are similar to the light produced by incandescent lighting. The cool white lamps are normally purchased for stores. However, the warm while lamps are used by the grocery stores to enhance the look of the department.

The cool white lamps provided by Malaysia have normal fluorescent lamp color with more green effect in the produced lighting. It’s said that the daylight lamps manufactured have a blue tint and looks like the light reflected from the clean sky. Bug lightings manufactured by lighting Malaysia out of all other lighting fixtures Malaysia looks equivalent to the incandescent lighting. Fluorescent lighting like Bug light produces an orange-yellow light which stop the flying insects to get attracted towards the light so the residential area can be free from insects. These lights can be used in outdoor areas or porches of the homes, where insects usually are not needed but the light is essential. However if they are the one source of light in the area then the bug lights would not work. There must be a brighter light present nearby to attract the insects.

The typical plant of fluorescent lightings manufactures purple pink shade light. These lights are best for the plants. They also manufacture black lights that are utilized in sorts of application. These black lights are handy for lighting the indoor areas of house which having parties. They are manufactured in many sizes and shapes. So the lighting fixtures Malaysia have their own unique qualities which make them the best to be used.

Kohsun is one of the leading companies involved in the manufacture of fluorescent luminaires, components and accessories in Malaysia under the brand name of K. S. LITE. We manufacture a wide range of fluorescent fittings from economical batten fittings to high effic iency VISUAL DISPLAY UNITS ( VDU ) pre-anodized aluminium parabolic louvers fittings including custom made fixtures of special design for special application.